Metal engraving machine operating specifications

1) It is forbidden to place any tools or workpieces on the operating cabinet or machine beam.



  2) It is strictly forbidden to place the magnetic tool on the console, which will damage the display.



  3) During the machining process of the machine, close the protective cover door, and not close to the workpiece to avoid debris and injury.



  4) During the machining process of the machine tool, it is strictly forbidden to open the door of the machine cabinet, and it is not allowed to touch the internal circuit wires by hand to avoid high voltage electric injury.



5) It is forbidden to wipe the machine with kerosene cleaning, otherwise it will accelerate the aging speed of the cable.



6) Pay attention to the emergency stop switch during the machining process. If there is a problem, press the emergency stop switch.



7) During the machining process, the operator must not reach out into the machine after the machine is started; the workpiece cannot be touched.