Stone engraving machines, especially large engraving machines, high-power engraving machines, are very damaging when used. This loss is not only the damage of the knife, but also the loss of the engine. After using the engraving machine for a while, you will find that the power is not enough, the engine is not good enough, or there is a problem with very loud noise. So, how can we reduce the loss of the engine during the process of use and maintain it? Need to pay attention to the following aspects.
The first is the normal operation of the pump. The purpose of the stone engraving machine manufacturer to design the water pump is to reduce the problem of the machine, thereby cooling the engine and applying cooling effect. This cooling effect is to make the engine run more smoothly and reduce the loss of the engine through the temperature reduction and the heat dissipation.
In addition to ensuring the normal operation of the pump and the ability to maintain the engine, it is also very important to maintain the machine at regular intervals. For the engine, it also has a long operating limit. Generally, a large high-power engraving machine operates for a maximum of ten hours. It is best not to use it more than this time, let the machine rest and cool for a while, especially the engine. This rest time is very important, otherwise it will easily damage the quality of the engine.
