Koyo stainless steel bearing worry-free operation daily inspection and maintenance method

   The bearing capacity, rotation accuracy and wear resistance of koyo bearings change during use due to their own quality and external conditions. When the performance index of stainless steel bearings is lower than the requirements of use, the bearings will occur. If the fault even fails, the machine and equipment will stop after the failure of the koyo bearing, and various abnormal phenomena such as loss of function will occur. Therefore, it is necessary to find out the cause in a short period of time and take corresponding measures.
First, the clearance clearance of the imported bearings should be appropriate. If it is too large, it will cause impact. If it is too small, the lubrication effect will not be ideal, and serious damage may result. Therefore, clearance clearance must be appropriate.
Second, the quality of the journal of the imported bearing and the geometry of the stainless steel bearing must be guaranteed. It must not be recharged. This is related to whether the machine can operate normally.
Third, choose high-quality lubricants, strictly control the pressure flow, temperature of the oil and strengthen the oil filtration of the machine, and the timing detection is prepared.
Fourth, monitor the temperature of the diesel engine, the temperature will be high or the temperature will be too low, the work will not work properly. When it is cold, preheat it before using the diesel engine and turn the crankshaft by hand to get the oil into the friction surface.

For more information and purchase please visit: https://www.supplyforever.com